ABSTRACT

 The three phase were horizontal pipe was drawn with precise dimensions of the apparatus and strict gas into the system met which are as follows: gas inlet 12mm which increases the pressure of the due to its small size while water and oil inlet are 31 mm which was done putting so much consideration into place with respect to density and velocity inflow of the fluid, the the experimental area was 50mm and the total length is 265.59 which all represents the geometry of skewness test. The experimental setup was done putting the mesh pattern into optimal consideration with of 0.09 and the boundary conditions too will be accurate before running the; analysis. and At the end of the analysis, we had the virtual distribution of the multiphase flow across the pipe it will be represented in different forms such as static pressure (mixture). velocity distribution of the individual fluids across the pipe. Graphs will be plotted at different points with respect to the velocity and pressure drop across the length of pipe and change in velocity for the different fluids: gas, kerosene and oil which will the reaction of the fluids at different points. This mode of analysis can be applied in the oil and gas processing industry to enable the organization to save cost and get accurate result before investing into manufacture of the tools or parts.