Electrical Electronics Engineering

Design Of A Fuzzy Logic Controller For Car Air Conditioning System

ABSTRACT

Non-linear characteristic is a problem in temperature control of air conditioning in Automobile. Other controllers like the state flow controller uses different approximation methods to...

64 pages (11335 words) · Projects · 4 years ago

Control Of Power System Dynamics

ABSTRACT

Due to the imbalance between the electric power produced by the prime mover and the power consumed by loads including the network losses at all time instants, controllers are needed in...

83 pages (8216 words) · Projects · 4 years ago

Design And Construction Of An Am Transmitter xxx

ABSTRACT

This project covers the design, construction and testing of an AM Transmitter. An AM transmitter controls the transmitting and broadcasting of signals that supports information conveyance...

57 pages (8113 words) · Projects · 4 years ago

Design And Construction Of An Ifrared Remote Control Car Alarm Security System With Touch Detector Incorporated

ABSTRACT

Today, with the rapid growth of car theft all around the world, particularly in a country like ours Nigeria; coupled with the rate of incandescent crime at the go. A great need for a...

68 pages (9638 words) · Projects · 4 years ago

Design And Construction Of An Infrared Remote Control Car Alarm Security System With Touch Dector Incorporated.

ABSTRACT

This project deals with the design and construction of a remote controlled car security system.555 Timers were utilized to obtain the Monostable and Astable pulses required for the...

68 pages (9449 words) · Projects · 4 years ago

Design And Construction Of An FM Transmitter

ABSTRACT

This work explains the method and approach for the design and construction of frequency modulated radio transmitter. The design target is to find a way of making the production cost as...

47 pages (7432 words) · Projects · 4 years ago

Design And Construction Of 1.5kva Stabilizer

ABSTRACT

The 1.5KVA stabilizer is simply a device used to stabilize voltage fluctuation for electrical and electronic appliances. This device keeps the voltage level from the public power supply...

42 pages (5745 words) · Projects · 4 years ago

Design And Construction Of Automatic Greenhouse Monitor

ABSTRACT

 An automatic greenhouse monitor is designed to meet the growing demand of agricultural industries particularly greenhouse in Nigeria for automation of monitoring the humidity of the...

53 pages (6001 words) · Projects · 4 years ago

Design And Construction Of A Television Signal Preamplifier

ABSTRACT

This project presents the design and construction of a television signal preamplifier with a very high frequency of 54-216 MHz that has 12 channels, and ultra high frequency of 470-806...

44 pages (5827 words) · Projects · 4 years ago

Design And Construction Of A Wireless Microphone

ABSTRACT

In the communication industry today, the importance of microphones cannot be over emphasized. They can be found in different shapes and sizes as well as single units for public address...

66 pages (11189 words) · Projects · 4 years ago

Design And Construction Of Intercom System

ABSTRACT

The project presents the design and construction of a two way station intercom system. It provides a system for easy and reliable communication within a relatively small area such as...

49 pages (6345 words) · Projects · 4 years ago

Design, Construction And Characterization Of A 500va Single Phase Power Transformer.

ABSTRACT

A 500VA, single phase 240/12V power transformer was designed, fabricated utilizing our local raw material (mild steel), in order to ascertain the possibility of producing our own locally...

65 pages (9790 words) · Projects · 4 years ago

Design And Construction Of A Variable D.0 Power Supply: 0-30 Volts

ABSTRACT

Variable D.0 power supply O-30v is mostly needed in electronic circuit such as radios, computers, and televisions e.t.c. dry batteries and dry cells are ripple free and portable. However...

43 pages (6385 words) · Projects · 4 years ago

Techniques For Implementing An Effective Earthing And Lightning Protection System In Nigeria

ABSTRACT

The present level of unavailability in the power and telecommunication sectors of this country Is Iargely due to poor earthing and lightning protection systems because of the inconsistency...

50 pages (7777 words) · Projects · 4 years ago

Design And Construction Of A Call System For Healthcare Delivery

ABSTRACT

This project presents the design and construction of a call system for Healthcare Delivery. The system provides a medium for the management of Healthcare delivery for nurses/ doctors so as...

77 pages (14844 words) · Projects · 4 years ago

Design And Construction Of An Am Transmitter

ABSTRACT

This project covers the design, construction and testing of an AM Transmitter. An AM transmitter controls the transmitting and broadcasting of signals that supports information conveyance...

53 pages (7390 words) · Projects · 4 years ago

Design And Construction Of Fm Radio Receiver

ABSTRACT

This project concerned the design and construction of an FM radio receiver. In the course of this design, concentration was given to hard wiring which gives a faster response and...

35 pages (5103 words) · Projects · 4 years ago

Design And Construction For Automatic Metering And Billing System Of Power Holding Company Of Nigeria [PHCN].

ABSTRACT

Being considered a prime commodity, electricity is almost universally available. Electric metering system has been implemented in various ways and in various circumstances although in...

52 pages (8577 words) · Projects · 4 years ago

Design And Construction Of A Digital Display

ABSTRACT

The world has really turned into a global village unlike the old forms of electronic gadgets and electronic devices as well as  of such developments in liquid crystal display (LCD),...

53 pages (6702 words) · Projects · 4 years ago

Design And Construction Of Uninterruptible Power Supply (UPS)

ABSTRACT

 This project presents the design and constriction of Uninterruptible Power Supply (UPS) system with ar apparent power output of 500VA. This was achieved by tie use of the following...

60 pages (7110 words) · Projects · 4 years ago

Design And Construction Of An Automatic Greenhouse Monitor

ABSTRACT

The Automatic Greenhouse Monitor is simply an Automatic medium where by the watering of plant in a greenhouse is supplied within a controlled system. A greenhouse is a structural covering...

45 pages (4721 words) · Projects · 4 years ago

Design And Construction Of 12V 45ah Battery Charger With Overload And Short Circuit Protection

ABSTRACT

The 12v Automatic Battery Charger was Designed and Constructed with regulated output. The main component of the system is 120v-220v, 12v/ac step down induction transformer with variable...

45 pages (5252 words) · Projects · 4 years ago

Design And Construction Of A Three Stage Audio-Signal Amplifier

ABSTRACT

For the purpose of amplifying audio signals through three stages, we had involved some useful electrical and electronics devices and systems. Such devices and systems include the...

40 pages (5935 words) · Projects · 4 years ago

Design And Construction Of Automatic Voltage Regulator On 2.2kva Power

ABSTRACT

The automatic voltage regulator AVR) technology have been modify to what. is obtainable today, in today's world of civilization technology are virtually -the frame-work on 'which...

55 pages (6848 words) · Projects · 4 years ago

Design And Construction Of Traffic Light Controller

ABSTRACT

This project deals with the design and construction of an automatic traffic light controller. It uses complimentary metal oxide silicon (CMOS) integrated circuit(IC) (4017) as IC counters...

70 pages (9471 words) · Projects · 4 years ago
Please wait...