ABSTRACT
Vortices are the major component of turbulent flow; the phenomenon is ubiquitous. The quest to study the phenomenon however is being limited by the lack of laboratory equipment to enhance...
ABSTRACT
In this project, a production plan for Golden Guinea Brewery, Umuahia was developed. The company is into the production of four different products namely Golden Guinea Lager, Oldberg Lager,...
ABSTRACT
This study examined a system dynamic model of greenhouse gases in Nigeria. The objectives of the study were to simulate the effects of carbon dioxide, methane and nitrous oxide emissions...
ABSTRACT
In this study, Date Seed Granulated Powder (DSGP) was used as a reinforcement material for Glass Fibre Reinforced Epoxy resin (GFRE) composite. Specifically, the DSGP was prepared and...
ABSTRACT
This study aims to design a solar tracking system based on microcontroller Arduino using sensors to facilitate optimum solar panel positioning. The system consists of several electronic...
ABSTRACT
Palm kernel production potentials of several countries are far from been fully exploited. At present, many countries are operating below expected capacity. The motive of the project work...
ABSTRACT
This study deals with the design, construction and performance evaluation of 1000W (1KVA) fuelless power generating set to serve as an alternative source of energy. The materials...
ABSTRACT
This study examined the parameters and conduct life cycle cost assessment of a 12 volts lead acid battery. The objectives of the study were to determine and evaluate the cost components...
ABSTRACT
The study aimed to optimize the production process of Ceramic candle filter by developing and modeling the ceramic filter using Response Surface Methdology (RSM). The development of model...
ABSTRACT
Due to irregular power supply common in developing countries, as well as the growing high cost of hydrocarbon, the need arises for the development of a dual energy source oven that...
ABSTRACT
The study was aimed at enhancing the utilization of a blend of recycled engine oil and ash as an appropriate quenchant for the austempering heat treatment of mild steel. The...
ABSTRACT
The integrated fish feed machine is used for processing a variety of materials into higher grade aquatic feed pellet for fish, catfish, shrimps, crabs, etc. The final feed...
ABSTRACT
There are various Gas Emission Monitoring System available in Nigeria today. However, there is a problem with the efficiency of these systems and often it fails to achieve what it...
ABSTRACT
The present study examined the adsorption and corrosive inhibitive properties of neem root on mild steel in alkaline and acidic media. The objectives of the study were to extract...
ABSTRACT
In this research work the improvement of the mechanical properties of mild steel by the heat treatment methods of austenitizing and austempering using locally sourced plantain stem extracts...
Abstract
Mild steel is one of the engineering alloys that are utilized in many industrial applications (El-Etre, 2007). Its usefulness is traced to its availability, moderate strength and cost...
ABSTRACT
A submersible centrifugal pump test rig has been developed for fault detection analysis in the laboratory. A microcontroller designed and programmed in C++ was used alongside sensors for...
ABSTRACT
The machine comprises an automated soap stamping and tableting module, the operational parameters evaluated were conveying speed, stamping and tableting speed, and time of operation while...
ABSTRACT
This research involves developing and thermo-economic evaluation of a small-scale waste plastic pyrolysis plant for recovery from petroleum oil. The plant was developed using locally...
ABSTRACT
The World Wide Web is a rapidly growing and changing information source. This reality is gradually replacing the traditional way users obtain news or information. Traditionally, individuals...
ABSTRACT
The development of a sustainable alternative source of renewable energy has been the greatest global challenge of the century. With the growing population and subsequent increasing...
ABSTRACT
A conventional in-line piston engine was modified to reduce friction power loss and heat loss. The modification was achieved by including roller bearings, rack and pinion in the power train...
FIRST
SEMESTER M.ENG DEGREE EXAMINATION. 2018/2019 ACADEMIC
SESSION
FIR.ST SEMESTER, 2020/2021 SESSION
ABSTRACT
This study involves empirical evaluation of Ohiya clay to determine the optimal framework of composing it with other materials into standard ceramic tiles to enable effective industrial...