ABSTRACT
Performance evaluation of a Solar Organic Rankine System (SORS) for electricity generation was carried out to determine the suitability of the system based on local solar radiation...
ABSTRACT
Analytical Hierarchy Process was applied in this study to reduce time used in the appraising credit request from Nigerian manufacturing sectors by banks. The major factors/criteria...
ABSTRACT
The adsorption mechanism was confirmed to be physical and spontaneous. Adsorption isotherms like Langmuir adsorption isotherm, Freudlich adsorption isotherm, and Temkin adsorption isotherm...
ABSTRACT
This study investigated the level-of total quality management implementation in Genesis fast food, basically five (5) outlets in Port Harcourt. Four (4) research questions were formulated...
ABSTRACT
A hydraulic press and pull machine comprising of: a frame, cylinder and piston, two threaded studs, hydraulic pump and hose, pulling clamp and a work piece support was designed, fabricated...
ABSTRACT
This study involves evaluation of using bitumen-palm kernel oil blend as quenching media during the heat treatment of two grades of steel (0.56%C-Steel and 0.76%C-Steel) and ductile cast...
ABSTRACT
The development of a sustainable alternative source of renewable energy has been the greatest global challenge of the century. With the growing population and subsequent increasing...
ABSTRACT
This study presents an environmental and life cycle analysis of different gas turbine inlet cooling systems. The research objectives involves the parametric modelling of the basic...
ABSTRACT
This design work presents an improved centrifuge for dewatering cassava mash that will extract affluent from the mash for any genotype of cassava. The methods adopted in the ...
ABSTRACT
This research presents a technical assessment of wind power potential of Ikeja city, Lagos
state, Nigeria to determine its viability for wind turbine system. Initially Weibull probability
...
ABSTRACT
A modified soap stamping and tableting machine comprising of a conveying unit,
stamping/tableting unit and one electric motor was designed, tested and evaluated. The
machine is powered by 1HP...