Design And Construction Of Dc To DC Chopper Trainer
ABSTRACT
The speed of separately excited DC motor can
be controlled from below and up to rated speed using chopper as a converter.
The chopper firing circuit receives signal from controller and then chopper
gives variable voltage to the armature of the motor for achieving desired
speed. There are two control loops, one for controlling current and another for
speed. The operation of a chopper was done, so also the construction of a
chopper based trainer (training module). The complete layout of DC drive
mechanism is obtained. The designing of current and speed controller was
carried out. After carrying out the laboratory test and analysis, it was found
that the measured result was in accordance with the expected result. Hence the
project was confirmed okay
0.0
AKPAN, A (2023). Design And Construction Of Dc To DC Chopper Trainer. Mouau.afribary.org: Retrieved Nov 23, 2024, from https://repository.mouau.edu.ng/work/view/design-and-construction-of-dc-to-dc-chopper-trainer-7-2
AKPAN, AKPAN. "Design And Construction Of Dc To DC Chopper Trainer" Mouau.afribary.org. Mouau.afribary.org, 22 May. 2023, https://repository.mouau.edu.ng/work/view/design-and-construction-of-dc-to-dc-chopper-trainer-7-2. Accessed 23 Nov. 2024.
AKPAN, AKPAN. "Design And Construction Of Dc To DC Chopper Trainer". Mouau.afribary.org, Mouau.afribary.org, 22 May. 2023. Web. 23 Nov. 2024. < https://repository.mouau.edu.ng/work/view/design-and-construction-of-dc-to-dc-chopper-trainer-7-2 >.
AKPAN, AKPAN. "Design And Construction Of Dc To DC Chopper Trainer" Mouau.afribary.org (2023). Accessed 23 Nov. 2024. https://repository.mouau.edu.ng/work/view/design-and-construction-of-dc-to-dc-chopper-trainer-7-2